Telemisura e acquisizione dati di bordo

ACRA KAM-500 - soluzione rugged, modulare, miniatura

KAM-500 è un sistema di acquisizione e telemisura imbarcabile di tipo modulare, miniaturizzato, robusto ed affidabile, per condizionare e acquisire, tramite PCM IRIG-106 Ch.4 o Ethernet IENA / iNET-X, un elevato numero di parametri di misura.

Qualificato secondo normative MIL-STD, è utilizzato nei più importanti programmi di Flight-Testing e Certificazione di velivoli civili e militari, in attività OLM (Operational Load Monitoring) e HUMS, in applicazioni “space” e in molti settori della Difesa, nella sperimentazione di sistemi complessi, nell'acquisizione di segnali e dati su mezzi navali, nel testing di veicoli militari e non...

KAM-500 può essere configurato in modo single-chassis o multi chassis distribuito, PCM o Ethernet Network, ed offre un'ampia varietà di moduli per sensori di misura, segnali analogici e digitali, bus di controllo e comunicazione, Voce (CVSD), Video e per stream PCM; moduli di output analogico o digitale, di sincronizzazione del tempo GPS o IRIG, moduli BIT (Built In Test), per la verifica continua del corretto funzionamento del sistema in tutti i suoi aspetti.

Un particolare modulo matematico (KAD/MAT/101) consente processi in tempo reale per la creazione di parametri virtuali calcolati da quelli fisici acquisiti.

approfondisci

KAM-500, equipaggiato di modulo di memoria flash, removibile o scaricabile via Ethernet, opera come solid-state data-recorder.

DAS Studio è il software grafico di setup e gestione di KAM-500, sia per architetture basate su comunicazione interchassis di tipo PCM che per quelle Network Integrate (iNET).

Moduli di Acquisizione di KAM-500

Un’ampia gamma di moduli di condizionamento e acquisizione con ADC simultaneo e risoluzione fino a 16 bit e con trattamento digitale dei segnali, in modo da garantire elevata accuratezza in un ampio range di temperatura.

Sono disponibili per sensori a ponte estensimetrico, resistivi, potenziometrici e piezoelettrici, LVDT e RVDT, TC, RTD, scanner per pressioni e temperature, segnali in tensione e corrente…

Moduli di acquisizione per segnali discreti: frequenza, periodo, eventi e per monitoring data parsing su bus digitali e avionici: RS232/422, ARINC429, MIL-STD-1553, STANAG-3910, Ethernet, AFDX, FireWire…

I moduli Video, con compressione H.264 o MPEG-4 (PAL o NTSC), offrono buona qualità delle immagini anche con bassi data-rate e permettono l’acquisizione di più sorgenti video sullo stesso data-link (PCM o Ethernet) utilizzato per i segnali e i dati di misura.

Telemisura e acquisizione dati di bordo

ACRA KAM-500 - soluzione rugged, modulare, miniatura

Prestazioni

Tipologia	sistema di acquisizione imbarcabile ruggedized, qualificato secondo normative MIL-STD
Alimentazione	28Vdc (nominale)
Protocolli di uscita	PCM secondo IRIG 106, Ethernet, ARINC429, ARINC573/717 (per crash recorder).
Slot per chassis	da 2 a 13 slot utente per chassis
Chassis per sistema	uno o più chassis secondo differenti tipologie di interconnessione PCM master/slave o Ethernet
Dimensioni	compatte; variabili in accordo alla tipologia di chassis
N° di canali	virtualmente illimitato
Data storage	CF removibile o memoria flash scaricabile via Ethernet.
Segnali e dati acquisibili
Analogici	tensione, corrente; sensori estensimetrici, potenziometrici resistivi, piezoelettrici e ICP compatibili, LVDT e RVDT, TC, RTD, scanner per pressioni e temperature; segnali synchro e 3-phase power
Digitali	frequenza, periodo, RPM, eventi discreti.
Bus	RS232/422/485, ARINC429, ARINC573, MIL-STD-1553, STANAG-3910, Ethernet, AFDX, FireWire, stream PCM, Panavia bus e Panavia MC/ENMC link, CANbus, CAIS…
Voce	due o più canali audio con compressione CVSD
Video	PAL, NTSC o Y/C (S-video) con compressione MPEG-4
Tempo	IRIG-B, GPS o IEEE 1588 PTP per configurazioni distribuite su Ethernet Network

Chassis e moduli standard (suscettibile di aggiornamento)
*Chassis*
KAM/CHS/02F	KAM-500 chassis (base-mounted power supply and housing) - 2 user-slots
KAM/CHS/03F	KAM-500 chassis (base-mounted power supply and housing) - 3 user-slots
KAM/CHS/03U/E	KAM-500 chassis - 3 user-slots
KAM/CHS/04L/B	KAM-500 chassis, narrow form - 4 user-slots
KAM/CHS/05F/SC	KAM-500 chassis - 5 user-slots
KAM/CHS/06U/E	KAM-500 chassis - 6 user-slots
KAM/CHS/09U/E	KAM-500 chassis - 9 user-slots
KAM/CHS/13U/E	KAM-500 chassis - 13 user-slots
Basic Modules
KAD/BCU/101/E	IRIG-106 backplane controller and PCM encoder
KAD/BCU/105/E	Ethernet backplane controller - IENA compatible
KAD/BCU/140/C	Ethernet backplane controller - IENA/iNET-X compatible
KAD/BCU/140/X1	Ethernet backplane controller - IENA/iNET-X compatible
KAD/BCU/142	Fast Ethernet controller with aperiodic transmission and PTP1588 v1 sync
KAD/BIT/101	Built-in self test module
KAM/BIT/102	Built in Test packetiser.
KAD/CDI/101	Interface module for the cockpit display unit (OBE/CDU/001)
KAD/DAC/001/B	8-channel analog outputs with 16-channel discrete outputs
KAD/ENC/005/B	IRIG-106 PCM encoder - 1ch
KAD/ENC/106	IRIG-106 PCM encoder (PMF output)
KAD/ENC/111	CCSDS encoder (Ethernet interface, internal 64MB memory buffer)
KAD/ETH/101/B	DA and programming over Ethernet (IENA compatible)
KAD/ETH/102	iNET-X compatible 2.5Msample/sec data acquisition and programming over Ethernet
SAM/DEC/007/C	Acra KAM-500 programming interface with IRIG-106 PCM decoder
*Analog Modules*
KAD/ADC/008	Single ended ADC (program. analog gain, three phase power monitor, 1kHz b/w) - 6ch at 20sps
KAD/ADC/010/C	Differential ended ADC (22kHz b/w) - 2ch at 100ksps
KAD/ADC/011/C/10V	Single ended ADC (0.66kHz b/w, ±10V) - 48ch at 8.5ksps
KAD/ADC/011/C/40V	Single ended ADC (1.17kHz b/w, ±40V) - 48ch at 8.5ksps
KAD/ADC/014/D/25m	16 channel bridge A/D converter with voltage excitation and signal conditioning
KAD/ADC/105/B	Differential ended ADC (programmable analog gain, 6kHz b/w) - 8ch at 24ksps
KAD/ADC/106/C	Accelerometer ADC (current excitation, program. analog gain, 6kHz b/w)- 6ch ICP and 2ch D/E at 24ksps
KAD/ADC/109/C/QB120	¼-bridge 120? ADC (current excitation, programmable analog gain, 6kHz b/w) – 8ch at 24ksps
KAD/ADC/109/C/S1	Full-bridge ADC (voltage excitation, programmable analog gain, 6kHz b/w ) – 8ch at 24ksps
KAD/ADC/109/C/S2	Full-bridge ADC (voltage excitation, program. analog gain, sense lines, 6kHz b/w) – 8ch at 24ksps
KAD/ADC/111/10V	48 channel S/E analog-to-digital converter
KAD/ADC/111/40V	48 channel S/E analog-to-digital converter
KAD/ADC/112/100m	Differential ended ADC (3kHz b/w, ±10V) - 24ch at 12ksps
KAD/ADC/112/10V	Differential ended ADC (3kHz b/w, ±10V) - 24ch at 12ksps
KAD/ADC/112/1V	Differential ended ADC (3kHz b/w, ±1V) - 24ch at 12ksps
KAD/ADC/112/40V	Differential ended ADC (3kHz b/w, ±40V) - 24ch at 12ksps
KAD/ADC/113/B	¼-bridge ADC (current excitation, PT100 temp. sensors, 3kHz b/w) - 16ch at 12ksps
KAD/ADC/114/100m	Full-bridge ADC (voltage excitation, strain gages, 3kHz b/w) - 16ch at 12ksps(100m InputRange)
KAD/ADC/114/10V	Full-bridge ADC (voltage excitation, strain gages, 3kHz b/w) - 16ch at 12ksps (10V InputRange)
KAD/ADC/114/1V	Full-bridge ADC (voltage excitation, strain gages, 3kHz b/w) - 16ch at 12ksps (1V InputRange)
KAD/ADC/115	¼-bridge ADC (current excitation, PT1000 temp. sensors, 6.25kHz b/w) - 16ch at 25ksps
KAD/ADC/116/10V	Accelerometer ADC (current excitation, program. analog gain, 3kHz b/w, ±10V) – 12ch at 12ksps
KAD/ADC/116/10VNE	Accelerometer ADC (current excitation option, program. analog gain, 3kHz b/w, ±10V) – 12ch at 12ksps
KAD/ADC/116/1V	Accelerometer ADC (current excitation, program. analog gain, 3kHz b/w, ±1V) – 12ch at 12ksps
KAD/ADC/117/B	Full-bridge ADC (current excitation, programmable analog gain, 6kHz b/w) - 8ch at 24ksps
KAD/ADC/117/B/E12	Full-bridge ADC (current excitation, programmable analog gain, 6kHz b/w) - 8ch at 24ksps
KAD/ADC/118/100m	Full-bridge ADC (voltage excitation, 3kHz b/w, ±100mV) - 12ch at 12ksps
KAD/ADC/118/10V	Full-bridge ADC (voltage excitation, 3kHz b/w, ±10V) - 12ch at 12ksps
KAD/ADC/118/1V	Full-bridge ADC (voltage excitation, 3kHz b/w, ±1V) - 12ch at 12ksps
KAD/ADC/120/100m	Full-bridge ADC (voltage excitation, 3kHz b/w, ±100mV) - 12ch at 12ksps
KAD/ADC/120/10V	Full-bridge ADC (voltage excitation, 3kHz b/w, ±10V) - 12ch at 12ksps
KAD/ADC/120/1V	Full-bridge ADC (voltage excitation, 3kHz b/w, ±1V) - 12ch at 12ksps
KAD/ADC/126/B	Accelerometer ADC (current excitation, programmable analog gain, 25kHz b/w) - 4ch at 100ksps
KAD/ADC/129/S1	Full-bridge ADC (voltage excitation, programmable analog gain, 25kHz b/w) - 4ch at 100ksps
KAD/ADC/129/S2	Full-bridge ADC (voltage excitation, program. analog gain, sense lines, 25kHz b/w) - 4ch at 100ksps
KAD/ADC/135	12-ch. bridge A/D converter with excitation, balancing & signal conditioning
KAD/ADC/135/E12	12-ch. bridge A/D converter with excitation, balancing & signal conditioning (uses ±12V for excitation)
KAD/CDC/002	Differential ended current-to-digital converter (1.1kHz b/w)- 24ch at 17.5ksps
KAD/LDC/101/10K	LVDT/RVDT-to-digital converter (voltage excitation, 6kHz b/w) - 4ch at 24ksps
KAD/LDC/101/2.5K	LVDT/RVDT-to-digital converter (voltage excitation, 6kHz b/w) - 4ch at 24ksps
KAD/LDC/101/400	LVDT/RVDT-to-digital converter (voltage excitation, 6kHz b/w) - 4ch at 24ksps
KAD/LDC/101/5K	LVDT/RVDT-to-digital converter (voltage excitation, 6kHz b/w) - 4ch at 24ksps
KAD/MDC/002	Multiplexing ADC (program. analog gain, pressure scanner, external temp. compensation) - 2ch at 12.5ksps
KAD/MDC/103	Multiplexing ADC (program. analog gain, pressure scanner, polynomial temp. compensation) - 2ch at 20ksps
KAD/SDC/001	Synchro-to-digital converter - 2ch at 24ksps
KAD/TDC/002/D	Thermocouple ADC (reference compensation, 40Hz b/w) - 15ch at 512sps
KAD/TDC/002/D/10m	Thermocouple ADC (reference compensation, 10 mV input range, 40Hz b/w) - 15ch at 512sps
KAD/TDC/102/B	Thermocouple ADC (reference compensation, 250Hz b/w) - 15ch at 1ksps
KAD/TDC/107	Thermocouple ADC (reference compensation, high accuracy, 4Hz b/w) - 12ch at 8sps
KAM/CDC/101/300	Charge-to-digital converter (piezoelectric sensors, 300Hz b/w) - 4ch at 24ksps
KAM/CDC/101/6K	Charge-to-digital converter (piezoelectric sensors, 6kHz b/w) - 4ch at 24ksps
Bus Modules
KAD/ABM/101	ARINC-429 bus monitor PARSER/SNARFER - 8ch
KAD/ABM/102/B	8-channel ARINC-429 bus monitor and packetizer
KAD/ARI/002	ARINC-429 transmitter - 1ch
KAD/ARI/103	ARINC-573 bus monitor parser - 1ch
KAD/ARR/101	AFDX redundancy remover
KAD/CBM/101	CCDL bus monitor parser - 4ch
KAD/CBM/102	CAN bus monitor parser - 4ch
KAD/CBM/103	4-bus CCDL/MCDL monitor
KAD/CBM/105	CAN bus packetiser
KAD/DEC/003	IRIG-106 PCM decoder/merger - 2ch
KAD/DEC/003	IRIG-106 PCM decoder/merger - 2ch
KAD/DEC/103	IRIG-106 PCM decoder/merger - 2ch
KAD/EBM/101/B	Ethernet bus monitor parser - 1ch
KAD/EBM/102	Gigabit Ethernet bus monitor parser - 1ch
KAD/EBM/103	Ethernet PARSER for ARINC-429 over RCI NDO Communication Protocol
KAD/FBM/102	Firewire bus monitor parser - 1ch
KAD/FBM/103/B	Firewire S200b bus monitor parser - 1ch
KAD/MBI/001/B	MIL-STD-1553 remote terminal - 1ch
KAD/MBM/101	Dual redundant MIL-STD-1553 bus packetizer
KAD/MSB/103/C	MIL-STD-1553 bus monitor parser - 1ch dual redundant
KAD/PBM/001	Panavia bus monitor parser - 8ch
KAD/PBM/002	MC/ENMC bus monitor snarfer/parser - 1ch
KAD/TBM/101	TTP Bus Monitor
KAD/UAR/002/C	RS-232/422/485 bus monitor parser - 4ch
KAD/UAR/003	RS-422 bus monitor parser - 2ch
KAD/UAR/102/C	RS-232/422/485 bus monitor snarfer/parser - 4ch
KAM/SBM/001	Stanag-3910 bus monitor
KAM/SBM/101	EFA Express Bus Monitor
Video & Voice
KAD/VDC/001	Differential ended voice-to-digital converter (CVSD) - 2ch at 64ksps
KAD/VID/103/B	MPEG-4 video encoder (analog video input) - 1ch
KAD/VID/106	H.264 video encoder (analog video input) - 1ch
Discrete & Digital Modules
KAD/DPI/002	Data input (RAM reader) - dual-port
KAD/DSI/002	Discrete input (counters, time tagging) - 24ch
KAD/DSI/003/B	Bi-level input (counters, time tagging) - 24ch
KAD/DSI/102/B	24 ch. discrete input module with programmable counters and time tagging
Data Storage
KAD/MEM/004/B/32G	CompactFlash memory module (data extraction via Ethernet, 32GB)
KAM/MEM/103/B	CompactFlash memory module
Time & GPS
KAM/TCG/102/D	Combined GPS and IRIG input
Network Modules
KAD/SWI/101	Ethernet switch - 3 to 1 aggregator
KAD/SWI/102	4-port Ethernet switch module with a dedicated programming port
KAD/SWI/107	4-port Ethernet tap module
KAD/SWI/108	4-port Ethernet Xbar switch module

Nota: i dati riportati in questa tabella sono di semplice riferimento, possono contenere errori, non essere aggiornati e/o subire modifiche in qualsiasi momento; per un'informazione più accurata è necessario fare riferimento al datasheet del prodotto.